LG 30K BTU Cooling 22 SEER2 Two Zone Wall Mount Mini Split Package with 15k + 18k Indoor Units

$0.00

This is a dual-zone ductless mini-split heat-pump / AC system from LG. That means one outdoor unit supports two indoor wall-mounted units (one 15,000 BTU, one 18,000 BTU). acwholesalers.com
Cooling capacity is about 30,000 BTU (total) with a SEER2 of ~ 22.0. The refrigerant used is R-32. acwholesalers.com
Brand-series includes “Art Cool Mirror” for some models, and LG also has “LGRED° Heat” versions. Some models are more design-oriented, others optimized more for heating performance in colder climates. acwholesalers.com+1

⚙️ Key Features & Specs

Here are typical features and what capacity / performance numbers to expect:

Feature	What it typically includes / what to check
Indoor Units	Two wall mount units, one 15k BTU, one 18k BTU. Each has its own controller/remote. They can operate independently (separate zones). acwholesalers.com
Outdoor Unit	Handles the two zones; variable compressor / inverter type. Should have enough capacity to drive both indoor units under moderate load.
Energy Efficiency	SEER2 around 22.0 is very good — meaning relatively low electrical consumption for cooling in US climate zones.
Refrigerant	R-32 is common in newer models — more efficient, lower global warming potential than older R-410A in some cases.
Heating	Many of these dual-zone systems are heat pumps, so they also provide heating. The heating capacity may be a bit lower, especially in cold outside temps, so check the heating-BTU vs outdoor temp rating.
Noise	Indoor units tend to be quiet; outdoor unit noise depends on size and installation. Wall-mounted units often have “quiet” modes.
Controls / Features	Remote control for each indoor unit; possibly WiFi / smart-app control (SmartThinQ or equivalent); swing / auto mode fan blades; timers; dehumidification settings. Design aesthetics (e.g. “mirror style”) for visible indoor units in certain models. acwholesalers.com

⚠️ Things to be careful/verify

True capacity: 15k + 18k indoors does not always equate to “full 30k” output if both are running at maximum. Some derating occurs in hot weather or long pipe runs.
Installation constraints: Distance (pipe length), elevation difference between outdoor and indoor, location of indoor units relative to the outdoor unit — these affect performance and sometimes warranty.
Heating performance in cold climates: If you're in Vermont or another cold region, make sure the model has good cold-climate heat pump performance (low ambient heating capability) or a backup source.
Electrical requirements: These systems need appropriate wiring, breakers, and possibly permits. Check if your electrical service and mounting capacity are sufficient.
Maintenance: Filters, coil cleaning, etc., must be maintained. Units with coatings (like Gold Fin) to resist corrosion help in moist or coastal climates. acwholesalers.com