Signature Hardware Boyce 70" Acrylic Air Massage Tub with with Integrated Drain, Overflow, and Foam Insulation

Signature Hardware Boyce 70″ Acrylic Air Massage Tub with Integrated Drain, Overflow, and Foam Insulation — specs, features, pros/cons, installation notes, and what to watch out for.

📋 Key Specifications & Features

From Signature Hardware & related vendor listings:

👍 What’s Good (Pros)

• Luxury / Spa Feel: The air jets (12 of them) + remote control give spa-like massage capability; sounds relaxing. Signature Hardware

• Heat Retention: Foam insulation helps keep the water warm longer, also helps reduce condensation (helps usability, comfort). Signature Hardware

• Integrated / Clean Drain & Overflow: Built into walls, no exposed pipes, which gives a cleaner look. Also reduces visible plumbing clutter. Signature Hardware+1

• Freestanding & Double-Ended Design: Both ends are usable, symmetrical; good for placement in open space or design flexibility. Signature Hardware+1

• Good Size: 70-inch length gives decent room for bathing comfort; water capacity substantial. For many users, this is a generous size.

• Modern Aesthetic & Features: Built with modern styling; features like no exposed plumbing, remote, magnetic access panel; looks premium.

👎 What to Watch Out For / Limitations (Cons)

• Space Requirements: 70-inch length and nearly 30-inch width plus plumbing clearance means you need enough room. For smaller bathrooms or tight layouts, this may dominate space.

• Faucet & Plumbing Installation: Since there are no pre-drilled faucet holes, you have to be careful when drilling (if needed) or use wall or deck-mount options. Must check plumbing access. Remote access panel helps for deck-mount, but still extra work. Signature Hardware+1

• Power / Blower for Air Jets: The air massage system will need a blower / electrical supply. Ensure you have nearby electrical (code compliant). Also maintenance of the blower (depending how it's built).

• Weight and Water Load: Fully filled (~80 gallons of water) plus weight of tub (~157 lbs empty) so substrate, floor framing, supporting structure must be adequate. Plan for weight + water.

• Maintenance: Air jets require cleaning / servicing to avoid buildup, mold, etc. Acrylic can scratch; gentle cleaning needed. Also the insulation/foam might trap moisture if not properly sealed.

• Cost: This is a high-end tub; the air massage + insulation + size add cost both for purchase and installation (plumbing, electrical, possibly floor reinforcements). The listed price is ~$3,999. Signature Hardware+1

⚙️ Installation / Technical Notes

• The tub comes fully assembled with its air system. Signature Hardware+1

• Back of tub has removable magnetic panel to allow access for deck-mount faucet installation. But you must check spec sheet for recommended faucet position before drilling. Signature Hardware+1

• Foam insulation is either included or optional. If ordered with foam, helps with retaining heat and minimizing noise or temperature swings. Signature Hardware

• Drain rough-in: There is a drain kit option. The kit is “quick connect drop-in” and includes necessary adapters etc. If installing over tile or cement floor, drain installation works above subfloor and beneath tile layer so you don’t need access beneath later. Signature Hardware+1

• Clearance: Because of the blower and components, ensure enough clearance behind or beneath as required by manufacturer for proper servicing.

• Water fill / water depth: Overflow is set; water depth to overflow is ~14-3/16″. Overfilling beyond overflow will cause spill. Signature Hardware+1